Manufacturing & Engineering

We value our preferred supplier status with many mining operators across Australia. We enjoy this partnership which often results in custom manufacture of various systems or devices to keep equipment running safely and efficiently. Some recent and ongoing manufactured systems are listed below.

People Safety / Exposure Solutions:

Control Cabinet Dust Extraction System

The ACS7500 is a purpose built product designed to achieve the same quality clean as a standard ‘blow out’ of the cabinet without exposing the user to the hazards of dust inhalation. This proven product is in the field and further information is available from the Austindo team.

View Part

Steer Accumulator Pre-Charge Display System

The "APD" provides maintenance staff with accurate pressure readout without the need to access and connect gauges. The system replaces the existing digital switches that were prone to failure and inaccurate readings and replaces with an analog transducer already utilised in existing truck systems. The display has advanced features including analog outputs for remote monitoring as well as fault latching and other configurable features.

View Part

Rectifier Doors

The rectifier cabinet section on a 17KG535 series control cabinet requires removal of a large cover that is secured with 28 bolts. The Austindo replacement panel has a build in hinged and lockable door that removes the manual handling risk and improves service efficiency.

View Part

Maintenance Solutions:

Calibration Panel

Correct calibration of the RP contactors on a Statex III system requires pull-in current to be accurately measured. This panel provides a simple and accurate way to correctly adjust and verify the spring tension in the 17CM55 model contactors whilst fitted in the truck.

View Part

Fault Guide App

This simple online resource provides quick access to basic fault information. Designed for both online and offline access please check it out and provide feedback to the Austindo team.

Open Fault Guide

Truck Specific Connector kits

Using the correct tool, connector, and pin for the job is essential for high quality and reliable field repairs. These Austindo kits have been designed to provide maintenance staff with the tools they need to get the job done right!

View Part

System Upgrades:

Digital Blower Pressure Switch

The DBPS is a direct replacement to the standard OEM pressure switch used to detect cooling air to the wheel motors and control cabinet. This upgraded product provides better reliability, more accurate calibration, and additional functions.

View Part

RSC Display

The RSC display provides realtime feedback to the operator to allow accurate adjustment of the RSC speed controller. This ensures the operator can safely navigate descents within mine and system parameters.

View Part

Exhaust Bracket Upgrade

This product is a direct replacement for the OEM insulation pieces present in the exhaust frames of the Grid box assembly. This optional upgrade addressed both the grid alignment issue as well as provides a fix to the common situation where the grid can ‘slip’ past the insulation piece as the stack is clamped.

View Part

Fibre Support Brackets

Current model Invertex systems are supplied from the factory with fibre optic support brackets that ensure the card is suitably mounted to withstand vibration and shock loads. The Austindo kit is an easy retrofit kit to provide fibre optic support to previous model trucks.

View Part

Service Brake Monitor

Service brake applications, and wear, are a common focus for mine operations. This product provides advanced real time information for the operator and can be calibrated to trigger ‘lockouts’ should continued service brake violations be detected.

View Part

More Off Site Services

Training

View Page

Component Supply & Repair

View Page

Manufacturing & Engineering

View Page